Kelvinator KGC20BNA User Manual
Also see for KGC20BLA: Installation manual
                | |
This User Manual has been prepared for owners and usersof the hot water system. Please keep it in a safe place forfuture reference.Meanings of symbols used in this manual are shown below:warningThis symbol indicates information concerning yourpersonal safetycautionThis symbol indicates information on how to avoiddamaging the hot water systemtips & informationThis symbol indicates tips and information aboutuse of the hot water systemenvironmental tipsThis symbol indicates tips and information abouteconomical and ecological use of the hot water systemFor the installerThe installation must be completed in accordance with theinformation supplied in the Installation Manual that comeswith your gas continuous flow hot water system.All other relevant National, State or Local regulations mustalso be conformed with and these include (but are notlimited to):• Australian Standard AS3500.1 – Water Supply• Australian Standard AS3500.4 – Hot Water Supply• Australian Standard AS3000 – Electrical Installation• Australian Gas Association Code AS5601 –Gas Appliance Installation• Local Water, Gas & Electrical Authority RegulationsMunicipal Building CodeswarningInstallation must be performed by a qualified installer (forexample, a licensed plumber or gas fitter).Inside you will find many helpful hints on how to use andmaintain your hot water system properly.Just a little preventative care on your part can save you agreat deal of time and money over the life of your hot watersystem. You'll find many answers to common problemsin the chart of troubleshooting tips. If you review the chartof Troubleshooting Tips first, you may not need to callfor service.This symbol indicates never to do thisThis symbol indicates always do thiswarningConnect with power properly.Otherwise, it may cause electric shock or fire due toexcess heat generation.Always ensure effective earthing.No earthing may cause electric shock.Disconnect the power and turn off the gas inlet valveto the hot water system if strange sounds, smell, orsmoke comes from it.It may cause fire and electric shock.Do not operate or stop the water heater by switchingon or off the power.It may cause electric shock or fire due to heat generation.Do not damage or use an unspecified power cord.It may cause electric shock or fire.If the power cord is damaged, it must be replaced bythe manufacturer or an authorised service centre or asimilarly qualified person in order to avoid a hazard.Do not modify power cord length or share the outletwith other appliances.It may cause electric shock or fire due to heat generation.Do not operate with wet hands or in a dampenvironment.It may cause electric shock.Do not allow water to run into electric parts.It may cause failure of machine or electric shock.Do not use the socket if it is loose or damaged.It may cause fire and electric shock.Do not open the water heater during operation.It may cause electric shock.Do not allow the power cord to rest close to hotsurfaces.It may cause fire and electric shock.Do not disassemble or modify water heater.It may cause failure and electric shock.ImportantKelvinator gas continuous flow hot water systems important notes 3 |
Related manuals for Kelvinator KGC20BLA
manualsdatabase
Your AI-powered manual search engine