Kelvinator R-404A Installation Manual

Kelvinator R-404A Installation Manual Manual pdf 42 page image

FLUORESCENT LAMP HOLDER/LIGHT STARTERSOCKET REPLACEMENTThe lamp holder and the light starter socket are located on the lamp channel assembly.40 MAINTENANCE & REPAIR1. Disconnect the power to the cabinet.2. Remove the lids from the cabinet.3. Remove the fluorescent bulbs.4. Remove the screws holding the stainless steelcountertop in place. The screws are locatedunder the inside length of the top of the serverside of the cabinet.5. Lift the stainless steel top off of the cabinet. Setit aside. (FIG. 1)6. For both the lamp holder and the starter socket,remove the screws holding the part in place.(FIG. 4-D) Remove the tape holding the wires tothe channel frame. (FIG. 2)7. Disconnect the lead wires at the butt spliceconnector. (FIG. 2-C)8. Replace part with correct new part number.9. Replace screws removed in Step 4. (FIG. 4-D)10. Connect white and blue lead wires to main wirewith butt connectors. Replace the tape holdingthe wires to the lamp channel.11. Replace the stainless steel top (FIG. 1) usingscrews removed in Step 4.12. Replace the starter.13. Replace the bulbs (fluorescent).14. Reconnect the power to the cabinet.