Kemppi FastMig MXP 37 Pipe Steel Operating Manual

Also see for FastMig MXP 37 Pipe Steel: Operating manual Operating manual

Contents

Kemppi FastMig MXP 37 Pipe Steel Operating Manual Manual pdf 15 page image

EN3.2 LayoutXF 37W007241CH REMOTECHANNELPANEL4T2TWISEROOT+/1. 3.2. 4.5. 6. 7. 8. 9.10.11.1. Main switch (long press)2. Activates MIG welding dynamics (short press)Selects the active wire feeder, if several wire feeders exist (long press)3. Gas test4. Wire inch5. Selects the previous memory channel6. Selects the next memory channel (short press)Locks selected memory channel (long press)7. Selects welding gun trigger mode (short press) or turns MatchLog function ON/OFF8. Selects crater fill, hot start (short press) or MMA/CC/CV (long press)9. Selects panel control, gun control unit or hand-held control unit (short press).Turns memory channel remote selection ON/OFF (long press).10. Power control knob11. Arc length and voltage control knob.Automatic weld data displayLast recorded welding values are displayed post welding.3.3 Button functions3.3.1 ON/OFF button (1)XF 37W007241CH REMOTECHANNELPANEL4T2TWISEROOT+/Short press: XF 37 panel returns to initial display.Long press: XF 37 panel is turned ON or OFF.NOTE! When wire feeder XF 37 control panel is turned ON, also the power source control panel X 37turns on and links automatically to this wire feeder.13© Kemppi Oy / 1312