Kemppi FitWeld 300 Operating Manual

Also see for FitWeld 300: Service manual

Contents

Kemppi FitWeld 300 Operating Manual Manual pdf 12 page image

EN2.6 Controlling welding functionsWith FitWeld 300 you can easily control welding parameters, changethe welding polarity and gun operating mode.The control panel provides two adjustment knobs. You can set the desired welding voltageand wire feed speed before or during welding, so easily tuning the desired arc performance tothe weld.2.6.1 Control panel functions10987 6 5 4321 10987 6 5 4321UONW003793FitWeldWith the left-hand control knob, set the value for filler wire feed speed. The maximum value is18 meters per minute.With the right-hand control knob, set the welding voltage. Adjustment range is from 11V to32V.The leds on the front panel indicate the following (from top to bottom):• Machine is turned on• Machine is overheated• Error in shielding gas flow2.6.2 Controls inside the machine3.1. 2.1. Welding gun operation mode switch.2. Shielding gas adjustment screw.3. Cable connections for reversing polarity.FitWeld 30010