EN2.3 positioning of the machinePlace the machine on a sturdy, level surface that is dry and does not allow dust or otherimpurities to enter the machines cooling air flow. Preferably site the machine to a suitablecarriage unit so it is above floor level.Notes for positioning the machine• The surface inclination may not exceed 15 degrees.< 15°• Ensure the free circulation of the cooling air. There must be at least 20 cm of free space infront of and behind the machine for cooling air circulation.• Protect the machine against heavy rain and direct sunshine.The machine is not allowed to be operated in the rain as the protection class of the machine,IP23S, allows preserving and storing outside only.NOTE! Never aim the spray of sparks from a grinding machine toward the equipment.2.4 distribution networkAll regular electrical devices without special circuits generate harmonic currents intodistribution network. High rates of harmonic current may cause losses and disturbance tosome equipment.2.5 Connecting cablesOn the front side of the machine, there are connectors for the interconnection cable and thecontrol cable for connecting the power source to the wire feeder.On the back side of the machine, there is a terminal strip connector, where you connect themains cable leads.5© Kemppi Oy / 1308