Kemppi Kempact 251R Operating Manual

Also see for KEMPACT 181A: Quick guide Service manual

EN4. Cut away any deformed filler wire section and dress the sharp wire tip.5. Connect the welding gun and tighten the collar.6. Press the welding gun trigger and allow the filler wire to feed through the gun cable tothe contact tip.Check once again that the filler wire is still properly seated in the grooves of both top andbottom feed rolls.4.5 Welding gunConnect the welding gun connector to the Euro adapter socket located below the wire feedmechanism and hand tighten only. Do not over tighten the gun collar.NOTE! Remember to remove the sharp cut tip of the filler wire before loading the wire to thewelding gun, so preventing damage to the liner inside the welding gun cable. This is particularlyimportant for soft filler wires such as aluminium. It will also improve feed quality and increase theservice life of your gun liner.Kempact 251R, 253R, 323R, 181A, 251A, 253A, 323A12