Kemppi Kempomat 2500 Operating Manual

Also see for 3200: Technical & service manual Operating manual Operating manual Operation instructions Service manual

Contents

Kemppi Kempomat 2500 Operating Manual Manual pdf 21 page image

EN8.1 CablesCheck the condition of welding and connection cables daily. Do not use faulty cables!Make sure that the mains connection cables in use are safe and according to regulations!The repair and mounting of mains connection cables should be carried out only by anauthorized electrician.8.2 pOwer sOurCeNOTE! Disconnect the plug of the power source from the mains socket before removing the coverplate.Check at least every 6 months (twice a year):• Electric connections of the unit - clean the oxidized parts and tighten the loosened ones.• NOTE! You must know correct tension torques before starting the repair of the joints.• Clean the inner parts of the machine from dust and dirt e.g. with soft brush and vacuumcleaner.• Do not use compressed air. Do not use pressure washing device!• There is a risk that dirt is packed even more tightly into gaps of components!• Only authorized electrician shall carry out repairs to the machines.8.3 dispOsal OF the maChineDo not dispose of electrical equipment with normal waste!In observance of European Directive 2002/96/EC on waste electrical and electronicequipment, and its implementation in accordance with national law, electrical equipmentthat has reached the end of its life must be collected separately and taken to an appropriateenvironmentally responsible recycling facility.The owner of the equipment is obliged to deliver a decommissioned unit to a regionalcollection centre, per the instructions of local authorities or a Kemppi representative. Byapplying this European Directive you will improve the environment and human health.19Kempomat 2500, 3200, 4200 / © Kemppi Oy / 1117