Kemppi MLS 2300 ACDC Operating Manual

Also see for MasterTig MLS 2300 ACDC: Service manual

Contents

EN3.1.4 synergetic pulsed Tig weldingThe ACX panel includes the synergetic TIG process, in which you only need to adjust thewelding current while other pulse parameters are programmed. Pulsing frequency is high,which guarantees concentrated arc and increased welding speed.3.1.5 long pulsed Tig weldingThis method gives you the possibility to adjust all pulse parameters. Weld pool control is alsoeasier. Long pulsed TIG welding is included in the ACX panel.3.1.6 spot welding functionIn spot welding function you can to adjust the duration of the welds in the range 0-10 s.3.1.7 MicroTack™ functionMicroTack welding is an efficient way to connect thin materials together using low heat input,which decreases distortions in base material.3.1.8 Tig-welding with mixed aC-dC current (MiX)Especially joining materials of different thicknesses can best be made out by using mixedcurrent. Adjust values with SETUP-function if needed.3.2 OperaTiOn FunCTiOns3.2.1 power sourceNOTE! Always switch the machine on and off from main switch. Do not use the mains plug forswitching!NOTE! Never watch the arc without a proper face shield designed for arc welding! Protect yourselfand the surroundings against welding arc and hot spatters!3.2.2 Function panelsBefore welding starts, welding settings suitable for the work piece are chosen with thefunction panel.The Kemppi Multi Logic System, MLS™, allows you to select the function panel based on thepurpose of use: the ACS panel for AC TIG welding with basic functions, or the ACX panel withpulsed TIG, 4T-LOG or MINILOG control of welding current and memory channel functions.The current display accuracy is 3 % ± 2 A, and the voltage display accuracy is 3 % ± 0.2 V.indicator lights1. 2. 3.1. Power On2. Thermal overload of power source3. Wrong mains voltage, over or under-voltage10MasterTig MLS 2300 ACDC / © Kemppi Oy / 1112