Kemppi Minarc 120AU Operating Manual

Also see for Minarc 150 AU: Operating instructions Operating manual Operation instructions

Contents

EN3.2 Operating FunCtiOnsSee also 2.4. Main components and 3.4. Welding selections.1. Signal light, machine 'ON', (VRD: 'VRD safe ON')2. Welding process selecting switch3. Welding current adjuster4. Signal light for overheating5. Suitable electrodes; reference values for welding current13245Main switch and signal lightWhen you turn the main switch to position I, signal light is lit and the unit isready for welding. Signal light is always on, when the unit is connected to themains and the main switch is in position I.NOTE! Always start and stop the machine from the main switch, never use theplug as a switch!signal light Vrd safe On (1)The machine is equipped with an OCV reduction circuit. The signal light is litwhen the circuit is activated and the unit is in working order.8Minarc 150, 151 / © Kemppi Oy / 1117