EN8. Warranty pOliCyKemppi Oy provides a warranty for products manufactured and sold by thecompany if defects in materials or workmanship occur. Warranty repairs are tobe carried out only by an authorised Kemppi Service Agent. Packing, shipping,and insurance are at the orderer’s expense.The warranty starts on the date of purchase. Spoken promises not included inthe terms of warranty are not binding on the warrantor.limitations of the warrantyThe following conditions are not covered under the terms of warranty:defects arising from normal wear and tear, non-compliance with operationand maintenance instructions, overloading, negligence, connectionto incorrect or faulty supply voltage (including voltage surges outsideequipment specifications), incorrect gas pressure, anomalies or failures inthe electric network, transport or storage damage, and fire or damage due toforces of nature. This warranty does not cover direct or indirect travel costs,daily allowances, or accommodation related to warranty service.The warranty does not cover welding torches and their consumables, feederdrive rolls,and feeder guide tubes. Direct or indirect damage caused by a defectiveproduct is not covered under the warranty.The warranty becomes void if modifications are made to the machine thatare not approved by the manufacturer or if non-original spare parts are usedin repairs. The warranty is also voided if repairs are carried out by a repairagent not authorised by Kemppi.undertaking warranty repairsWarranty defects must be reported to Kemppi or an authorised KemppiService Agent without delay.Before a warranty repair is undertaken, the customer must present proofof warranty or otherwise prove the validity of the warranty in writing. Theproof must indicate the date of purchase and the manufacturing number ofthe unit to be repaired. The parts replaced under the terms of this warrantyremain the property of Kemppi and must be returned to Kemppi if requested.After a warranty repair, the warranty of the machine or equipment, repairedor replaced, shall be continued to the end of the original warranty period.18Minarc 150, 151, 150 VRD, 120/150 AU / © Kemppi Oy / 0901