Kemppi Promig 530 Operation Instructions Manual
                                    | |
Contents
|
– Promig 530 / 061 © kemPPi oyLocal controls R31, R32potentiometerMIG/MAG: Local control for wire feed speed 0...18m/min or 0...25 m/minSYNERGIC MIG: Power control, min. and max.powers according to filler wiresSYNERGIC PULSED MIG: Power control, min.and max. powers according to filler wiresMMA welding: Welding current control, 10 A...max.current of power sourcepotentiometerMIG/MAG: local control for voltage of PRO powersource, 10 V...max. MIG voltage of power sourceSYNERGIC MIG: Fine control for arc length -9...0...9SYNERGIG PULSED MIG: Fine control for arclength -9...0...9MMA welding: No operationControl of welding dynamics R33MIG and MMA welding dynamics are adjusted with the same potentiometer.When you adjust welding dynamics the adjustment value -9...0...9 is shown indisplay V, which otherwise shows set value/welding voltage. Value of dynamicsis shown in display still for approx. 3 s after stopping the adjustments.Control of MIG/MAG welding dynamics:With control of MIG/MAG welding dynamics you can influence on how stable the arc is and howmuch spatter there is. With this control you can also optimize the welding result for wire type andshielding gas mixture you are using.-9...-1 Softer arc. Object: minimizing spatter0 Recommendable basic setting for all wires1...9 Harder arc. Object: e.g. maximizing stability of the arc on short circuit and welding ofsteel with 100 % CO² shielding gas (settings 7...9).Control of SYNERGIC MIG welding dynamics:In SYNERGIC MIG the control of welding dynamics is optimized for wire type you are using.With this control you can influence on stability of arc and how much spatter there is.-9...-1 Softer arc. Object: Minimizing spatter0 Recommendable basic setting1...9 Harder arc. Object: e.g. maximizing stability of the arc on short circuitNOTE! Control range for MIG welding dynamics -9...0...9 is a relative range according to wireand is different from control range -9...0...9 for dynamics of normal MIG/MAG welding.Shape of arc in SYNERGIC PULSMIG:In SYNERGIC PULSMIG the control for welding dynamics has an influence on shape of pulsedMIG arc.-9...-1 Wider pulsed MIG arc. Object: e.g. welding of square butt preparation0 Recommendable basic setting1...9 More narrow and better directed arc. Object: e.g. fillet weld seams of thin basicmaterials |
Related manuals for Kemppi Promig 530
Kemppi PROMIG 511 Operation Instructions Manual
Kemppi Promig 520R Operation Instructions Manual
Kemppi Promig 300 Operation Instructions Manual
Kemppi Promig 100 Operation Instructions Manual
Kemppi PROMIG 200 ML Operation Instructions Manual
Kemppi Protig 410 Operation Instructions Manual
Kemppi KEMPACT Operation Instructions Manual
Kemppi PS5000 Operation Instructions Manual
Kemppi FU 11 Operation Instructions Manual
Kemppi PRO EVOLUTION MXE Operation Instructions Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine