Kenmore 116.21514 Use & Care Manual

Contents

Kenmore 116.21514 Use & Care Manual Manual pdf 25 page image

ILIGHT BULB CHANGING_kWARNINGElectrical Shock Or Personal InjuryHazard!Turn off and unplug vacuum cleanerbefore performing maintenance to thevacuum cleaner. Failure to do so couldresult in electrical shock or personalinjury from the vacuum cleanersuddenly starling.NOTE: Use replacement bulb number 20-52,48, see part number detail in REPLACE-MENT PARTS(page 6).I. Remove PowerMate cover as shown inBELT CHANGING AND AGITATORCLEANING (page 23-24) section.2. Remove the lightbulb by pullingstraight out.,,11 ila,cAuT,oNIDa not plug in or turn on until the vacuumIcleaner is completely reassembled.JDo not use a bulb rated over 9WJ(13V). During extended use, heat fromJthe bulb could overheat surroundingPlastic parts._ _ _. t I 3. To replace theeusnm I light bulb, core-rO rlgn_/-_ -_,,,,_ _ fully insert fully_ 4. ReinstallPowerMate coveras shown in BELT CHANGING ANDAGITATOR CLEANING (page 23-24)section.AGITATOR SERVICING,_ WARNINGElectrlcal Shock Or Personal InjuryHazardAlways turn off and unplug vacuumcleaner before performing maintenanceto the vacuum cleaner. Failure to do socould result in electrical shock or personalinjury from vacuum cleaner suddenlys!art!ng. , .........New Brushes Worn BrushesBaseSuppedBetTO CHECK THE BRUSHESWhen brushes are worn to the level of thebase support bars, replace the agitatorassembly,TO REPLACEAGITATORASSEMBLY1. Remove PowerMate cover, belt andagitator assembly. See "To Remove Belt" inBELT CHANGING AND AGITATORCLEANING (page 23-24).2, Replace agitator assembly. See yourseparate repair parts list for part number.3. Reinstall belt and PowerMate cover. See"To replace belt" in BELT CHANGING ANDAGITATOR CLEANING (page 23-24}.25{