Check motor safety filter frequently andchange when dirty.Electrical Shock HazardUnplug power cord from electricaloutlet. Do not operate the vacuumcleaner without the motor safety fil-ter. Be sure the filter is dry andproperly installed to prevent motorfailure and/or electrical shock.Remove the dust bag as outlined in theDUST BAG REPLACEMENT section.MOTOR SAFETY FILTER(ELECTROSTATIC)1. The filter must bereplaced when dirty.It should be replaced Motorregularly dependingon use conditions,The filter CANNOTbe washed as it willlose its dusttrapping ability.Note: See PARTSAND FEATURES formotor safety filter number.2. If the filter,located in thebottom of the bagcavity, is dirty,remove it by pullingforward and outfrom under the ribs.3. Replace thefilter, smooth Motor(white) side up,by sliding it back Fl_into place underthe ribs in the bagcavity.Replace the bag as outlined in the DUSTBAG REPLACEMENT section.16EXHAUST FILTER(HEPA)Do not operate without exhaustfilter. Failure to due so may damagethe vacuum cleanerThe exhaust filter cartridge must bereplaced when dirty. It should be replacedregularly depending on use conditions. Thefilter CANNOT be washed as it will loseits dust trapping ability.Note: See PARTS AND FEATURES for theexhaust filter number.1. Slide theexhaust filtercover releasedown.2. Pull out onexhaust filtercover to removefrom bag cover.e.g /_Cover.. l/%Exhaust Filter _ _Cover ReleaseFE_ihaustBagExhaust3. Remove theexhaustfilterca_r_ge from thebag coven4. Replace theexhaust filtercartridge, carefullypositioning it so that itfits into the bag cover.The black edge ofthe filter should befacing away fromthe operator. Pushonly on filter cartridgeframe, not on filter itself.Exhaust Filter _L I/C°:h":':"EagCover-.-_,Exhaust5. Replace theexhaust filtercover and securethe latch bypushing it upward.