8Your vacuum cleaner featuresconvenient on-board storage for thecrevice tool and dusting/upholstery tool.1. Slide the crevice tool onto the upperholder on the back of the vacuumcleaner.NOTE: It will only fit one way.2. Press the dusting/upholstery tool ontothe bottom holder.Accessory StorageASSEMBLYFor ease of use,extend the cordfrom the base ofthe vacuum cleanerand press into theretainer clip.To store the cord:1. Make sure the cord hanger is in theUP position.2. Wrap the cord around the cordhanger and hook, then clip the plugonto the cord.NOTE: To reduce the risk of electricshock, this vacuum cleaner has apolarized plug; one blade is wider thanthe other. This plug will fit in a polarizedoutlet only one way. If the plug does notfit fully in the outlet, reverse the plug.If it still does not fit, contact a qualifiedelectrician to install the proper outlet.Do not change the plug in any way.To unwind the cord:1. Rotate the uppercord holder to theDOWN position.2. Unclip the plug andextend the cord.Cord StorageWARNINGPersonal Injury and Product Damage Hazard!DO NOT use outlets above counters. Damage to items in the surrounding areacould occur.Clip78017_Kenmore vac_EN_final 10/17/07 9:00 AM Page 8