Kenmore SEARS 116.25512 Owner's Manual

Also see for SEARS 116.25512: Owner's manual

Contents

Kenmore SEARS 116.25512 Owner's Manual Manual pdf 8 page image

OPERATING INSTRUCTIONSPersonal Injury and Product DamageHazard• DO NOT plug in if switch is in ONposition. Personal injury ordamage could result.• The cord moves rapidly whenrewinding. Keep children awayand provide a clear path whenrewinding the cord to preventpersonal injury,• DO NOT use outlets abovecounters. Damage from cord toitems in surrounding areacould occur.Cordt Pu,,cordoutof canister to_ esired length.The cord willnot rewind untilthe cord rewindbutton ispushed.NOTE: To reduce the risk of electric shock,this vacuum cleaner has a polarized plug;one blade is wider than the other. This plugwill fit in a polarized outlet only one way. Ifthe plug does not fit fully in the outlet,reverse the plug. If it still does not fit, con-tact a qualified electrician to install the prop-er outlet. Do not change the plug in anyway.2. Plug the polarized power cord into a 120Volt outlet located near the floor.To rewind: Unplugthe vacuum cleaner.Hold the plug whilerewinding to preventdamage or injuryfrom the movingcord. Push cordrewind button.PileHeightPedal-*IndicatorReleasePedal3. Lower wand from uprightposition bypressing on the handle release pedal.CAUTIONDO NOT leave the Power-Mate '_running in one spot in the uprightposition for any length of time.Damage to carpet may occur.4. Select a pile heightsetting by pressingthe small pedal on the rear of the Power-Mate®. The pile height setting shows on theindicator.See SUGGESTED PILE HEIGHTSETTINGS.Attention: Refer to your carpet manufac-turer's cleaning recommendations. Somemore delicate carpets may require that theybe vacuumed with the Power-Mate ® agitatorturned off to prevent carpet damage.L_OF FFLOOR_=,,-'_ 5. Select a switchposition on thehandle.OFFFLOOR - turns on the canister motor only.CARPET - turns on both the canister andthe Power-Mate ® motors.NOTE - When this switch is in the FLOORposition, the headlight DOES NOT functionsince no electricity flows to the Power-Mate ®.8