Kenwood 00271-13000 Instruction Manual

Also see for 00271-13000: Instruction manual

Kenwood 00271-13000 Instruction Manual Manual pdf 22 page image

1 Select Clock Adjustment modePress the [FM] or [AM] button.Select the "CLK ADJ" display.2 Enter Clock Adjust modePress the [4] or [¢] button for at least 1 second.The clock display blinks.3 Adjust the hoursPress the [FM] or [AM] button.Adjust the minutesPress the [4] or [¢] button.4 Exit Clock adjustment modePress the [MENU] button.Manual Clock AdjustmentSetting the operation check sound (beep sound) ON/OFF.Display Setting"Beep ON" Beep is heard."Beep OFF" Beep canceled.Touch Sensor TonePress the Reset button and when it's removed from thebattery power source1 Turn the power ON.2 Do the step 4 through 7 operation, and enter the SecurityCode."APPROVED" is displayed.The unit can be used.Because authorization by the Security Code is required when it'sremoved from the vehicle, personalizing this unit is by using theSecurity Code is a help in preventing theft.When the Security Code function is activated, the code can't bechanged and the function can't be released.Note, the Security Code can be set as the 4 digit number of yourchoice.1 Enter StandbyPress the [SRC] button.Select the "ALL OFF" display.2 Enter Menu modePress the [MENU] button for at least 1 second.When "MENU" is displayed, "Security" is displayed.3 Enter Security Code modePress the [4] or [¢] button for at least 1 second.When "ENTER" is displayed, "CODE" is displayed.4 Select the digits to enterPress the [4] or [¢] button.5 Select the Security Code numbersPress the [FM] or [AM] button.6 Repeat steps 4 and 5, and complete the Security Code.7 Confirm the Security CodePress the [¢] button for at least 3 seconds.When "RE-ENTER" is displayed, "CODE" is displayed.8 Do the step 4 through 7 operation, and reenter the SecurityCode."APPROVED" is displayed.The Security Code function activates.When the wrong Code is entered in steps 4 through 6, repeat fromstep 4.Security CodeMenu system— 22 —English