Kenwood AP-300-B Instruction Manual

Kenwood AP-300-B Instruction Manual Manual pdf 23 page image

You can listen to music from your BLUETOOTHdevice, such as portable audio player through theSystem.When you connect your device for the first time, itis necessary to register (pair) your BLUETOOTHdevice and the System.Connecting a BLUETOOTH device1 Set the source to “BLUETOOTH”. .(Turn)Main unitMain unitRemote controlThe “CONNECTING” indicator blinks, and the“ ” icon (BLUETOOTH icon) flashes slowly.The System will connect automatically to theBLUETOOTH device that was lastconnected.“CONNECTED” is displayed and the “ ”icon (BLUETOOTH icon) lights up. .CONNECTED0 The pairing operation is necessary whenyou connect the BLUETOOTH device forthe first time, or connect the System to thenew BLUETOOTH device.0 When “ ” icon (BLUETOOTH icon) lightsup, cancel the connection once by pressingand holding the [BLUETOOTH] on theremote control or [(PAIRING) I/W] on theSystem.“DISCONNECTED” is displayed then thedisplay disappears.2 Set the System to pairing standby. .(Hold)Main unitRemote controlThe “ ” icon (BLUETOOTH icon) flashesquickly.[I/W] on the main unit cannot be used while“CONNECTING” is displayed. Use“PAIRING” on the remote control.3 Turn on the BLUETOOTH function on theBLUETOOTH device.0 Select “Bluetooth” from “Settings” on theiPod touch/iPhone and Android device.0 Refer to the instruction manual of yourdevice for further details.4 Select “AP-300” from the list of device.The pairing is completed and theBLUETOOTH device is connected to theSystem automatically.0 When the target device requests forpassword during pairing, enter “0000”.5 Start playback on the BLUETOOTHdevice.The sound from the BLUETOOTH device isemitted from the System.NOTE0 Up to 9 BLUETOOTH devices can be registered.When the 10th BLUETOOTH device isregistered, registration of the device with theoldest connection history is deleted.0 Some BLUETOOTH devices may not beavailable to the System.23ENGLISHListening to a BLUETOOTH device