Kenwood AS-IP70 Instruction Manual

Kenwood AS-IP70 Instruction Manual Manual pdf 26 page image

AS-IP70 26A trouble with the unit does not always mean a failure. In case of a trouble, check the following lists before calling for service.Amplifier/SpeakersSymptom Remedy PageAudio is not output. Connect the cords properly.•Increase the volume setting.•78Clock is not displayed. Perform clock setting.• 10TunerSymptom Remedy PageRadio stations cannot be received. Connect the antennas.•Set the correct radio reception band (receiving mode).•Tune the frequency of the desired station.•71818Noise interferes. Install the antenna at a distance from the road.•Turn off the electrical equipment used in proximity of this unit.•Use the unit at a distance from a TV set.•—Preset stations cannot be displayed. Perform Auto Preset of radio stations again.•Perform Manual Preset of the radio stations of receivable frequencies.•1819USB/SD/iPod/iPhoneSymptom Remedy PageMusic, photo or video is not output evenafter an SD card/USB flash memory/iPod/iPhone is connected.Connect the SD card/USB flash memory/iPod/iPhone properly.•Connect the USB cable properly.•Confirm that the USB Mass Storage Class-compatible digital audio player• is turned on.99—How to Reset the UnitSymptom Check Point/TreatmentThe unit malfunctions (impossibility ofcontrol, erroneous display, etc.)This unit may malfunction due to disconnection of a cord while the unit is on or to otherextraneous factors. If this happens, reset the unit with the following steps.1Remove the external device such as an SD card, USB device or iPod/iPhone from the unit.2Disconnect the AC adapter, wait for some tens of seconds and then connect the AC adapteragain.Troubleshooting