Kenwood C-313 Instruction Manual

Also see for C-313: Quick start guide

Kenwood C-313 Instruction Manual Manual pdf 19 page image

English 19Using the Bluetooth audioYou can listen to audio files stored in Bluetooth audioplayer.Before use (Pairing function)You need to register your audio player and cell-phonebefore using it with this unit.1 Press D.AUDIO/iPod/Bluetooth button once ormore to select "Bluetooth".2 Press PAIRING/STEREO/MONO [PAIRING]button.3 Search this unit from the pairing target device.When the pairing target device (Bluetooth audioplayer etc.) detects this unit, it displays "C-515BT".4 Select and register this unit on the pairingtarget device.5 If the pairing target device requests entry ofthe passkey, enter "0000"." ", "CONNECTED" is displayed when pairingcompletes.⁄• Once a device is paired with this unit, it is not necessary torepeat the pairing operation. This unit can be connectedsimply by selecting "C-515BT" from the list of the Bluetoothdevice.• Note that this unit is not capable of multi-pairing.Playback of Bluetooth audio1 Press D.AUDIO/iPod/Bluetooth button once ormore to select "Bluetooth".2 Play the Bluetooth device.Basic opertionsOperation type OperationTo stop playback Press STOP 7 button.To interruptplaybackPress 6 button.Press again to resume playback.To search for aparticular passageduring playbackPress and hold 4 or ¢ button formore than 2 seconds.To select a track/ file Press 4 or ¢ button in play or pausemode.⁄• If the pairing target device does not support the AVRCPprofile, the device cannot be controlled from this unit.Operate from the Audio player.Playing an external componentAn external component can be connected to AUX INof this unit and played back.1 Connect an external component.Connect an external component to the [AUX IN]connector on the rear of this unit.2 Press AUX button.3 Start playing the connected externalcomponent.Using the AUXC-515BT