C-707I68Set the system clock to the correct time. If the system clock time setting is not correct, the Program Timerwill not start playback at the correct time.Setting the System ClockSet the time.44 Use the [<] and [>] keys to set the hour.Use the [<] and [>] keys to set the minutes.The currently set day of the week and time are displayed.zIf you make a mistake, repeat the procedure from the beginning.If there is a power failure or if the system is unplugged from the wall outlet for sometime, you must reset the system clock time.Pressing the [DISPLAY] key while the system is in the Standby mode (OFF) willdisplay the time for 5 seconds.zzzPress the [TIMER] key.Press the [<] or [>] key.11Set the day of the week.Use the [<] and [>] keys to set the day of the week.22Press the [ENTER] key.Select the timekeeping format.33Press the [ENTER] key.Press the [<] or [>] key.Press the [ENTER] key.Press the [ENTER] key.Press the [ENTER] key.12-hour formatMidnight andnoon displayed as“12:00”.12-hour formatMidnight andnoon displayed as“0:00”.24-hour formatThe current time will appear if clock settings are already configured.Press the [ENTER] key and advance to step 2.z
