(Only for DDX419BT)This unit has its own Registration Code. Once youhave played back a file with the Registration Coderecorded, this unit’s Registration Code is overwrittenfor copyright protection.• Touch [Enter] to display the information.• To return to the previous screen, touch [OK].(Only for DDX419BT)Register the security code for the unit. (Page 6)(Only for DDX396/DDX376BT/DDX276BT/DDX26BT)Displays the serial number.Adjust the touch positions of the buttons on thescreen.Touch the center of the marks at the upper left (1),the lower center (2), then the upper right (3) asinstructed.Cancel ResetTouch Panel Adjust• To reset the touch position, touch [Reset].• To cancel the current operation, touch [Cancel].(Only for DDX419BT)Assign functions to the keys of the remote controlleron the steering wheel.• This function is available only when your car isequipped with the electrical steering remotecontroller.• You can only register/change the functions whileyou are parked.• If your steering remote controller is not compatible,learning may not be completed and an errormessage may appear.• For connection, see page 57 for more information.1 Touch [Set] for Setting> to display the setting screen.2 Press and hold a button on the steeringremote controller to register or change.3 Select a function to assign to the selectedbutton.Steering Remote Control SettingVOLPlease select the function to assign to the button.VOLATTSRCDoneSettingsSettings4 Repeat steps 2 and 3 to register otherbuttons.5 Touch [Done] to finish the procedure.• The unit can register/change all of the buttons’functions at the same time. To do this, press allbuttons in turn and after pressing all of them, touch[Done] on the screen. However, new functions cannot be learnedafter this operation.• When changing the functions already learned, touchthe assigned function you want to change in step 3and then touch to select the new function from thefunction list.• Confirm the contents of the settable functions in thefunction list. You cannot edit the function list.To initialize the setting: Touch [Initialize] for.• A confirmation message appears. Touch [Yes].– To cancel the initialization, touch [No].47ENGLISH |
