Kenwood DDX4017DAB Instruction Manual

ENGLISH 45BLUETOOTHBLUETOOTH❏ Selecting an audio file from the menu12 Select a category (1), then a desired item(2).• Select an item in each layer until you reachand select the desired file.• You can change the page to display moreitems by pressing [ ]/[ ].• Press [ ] to return to the upper layer.Settings for Bluetooth devicesYou can change various settings for using Bluetoothdevices on the screen.1 Display the screen.On the Home screen:• You can also display the screen by pressing [ ] on the phone controlscreen (Page 42) or [ ] on the “BT Audio”source control screen (Page 44).2 Configure the Bluetooth settings.• You can change the page to display moreitems by pressing [ ]/[ ].❏ Setting itemsDevice List>Press [Enter] to show the list ofregistered devices. You can connecta device or delete registered devices.(Page 40) Changes the PIN code of the unit.(Page 39)Name>Shows the device name to be shownon the Bluetooth device — DDX****.Address>Shows the device address of the unit.Connect>• ON (Initial): A connection isautomatically established with thelast connected Bluetooth devicewhen the unit is turned on.• OFF: Cancels.HF/Audio>Selects the speakers used forBluetooth (both phone and audioplayer).• Front Only: Front speakers only.• All (Initial): All speakers.Response>• ON: The unit answers the incomingcalls automatically after 5 seconds.• OFF (Initial): The unit does notanswer the calls automatically.Answer the calls manually.< AutoPairing>• ON (Initial): Establishes pairingautomatically with the connectediOS device (such as iPhone)even if the Bluetooth function isdeactivated on the device. (Autopairing may not work for somedevices depending on the iOSversion.)• OFF: Cancels. Hold [Enter] to reset all settingsyou have made for using Bluetoothmobile phones and Bluetooth audioplayers.