Kenwood DDX5034 Installation Manual

Also see for DDX5034: Service manual Instruction manual Instruction manual

Contents

4 | DNX6140/DNX6000EX/DNX5140/DDX514/DDX5034/DDX5034BTConnectionBCPRK SW– +BCAAIf you connect the ignition wire (red) and the batterywire (yellow) to the car chassis (ground), you maycause a short circuit, that in turn may start a fire. Alwaysconnect those wires to the power source runningthrough the fuse box.Antenna CordFor the sake of safety, be sure to connect the parking sensor.Parking sensor wire (Light Green)Connect to the vehicle's parking brakedetection switch harness.Battery wire (Yellow)Ground wire (Black) -(To car chassis)Ignition wire (Red)Steering remote control input(Light Blue/Yellow)To steering remoteIf no connections are made, do not let the cable come out from the tab.Connect to the terminal that is grounded when eitherthe telephone rings or during conversation.Mute wire (Brown)Depending on what antenna you are using,connect either to the control terminal of the motor antenna, or to the powerterminal for the booster amplifier of the film or short pole-type antenna.Motor antenna control wire (Blue)When using the optional power amplifier,connect to its power control terminal.Power control wire (Blue/White)To car light control switch Dimmer control wire (Orange/White)Reveres sensor wire (Purple/White)Connect to vehicle's reverse lamp harness whenusing the optional rear view camera.Ignition keyswitchACCCar fuse box(Main fuse)BatteryCar fuse boxTo use the steering wheel remote control feature, you need to anexclusive remote adapter (not supplied) matches your car is required.