Kenwood DDX5036 Installation Manual

Also see for DDX5036: Instruction manual

Contents

8 | DNX SERIES/ DDX SERIESInstalling the GPS Antenna(DNX SERIES only)GPS antenna is installed inside of the car. It shouldbe installed as horizontally as possible to allow easyreception of the GPS satellite signals.To mount the GPS antenna inside your vehicle:1. Clean your dashboard or other surface.2. Peel the backing off of the adhesive on the bottomof the metal plate (accessory 3).3. Press the metal plate (accessory 3) down firmly onyour dashboard or other mounting surface. You canbend the metal plate (accessory 3) to conform toa curved surface, if necessary.4. Place the GPS antenna (accessory 2) on top of themetal plate (accessory 3).Accessory 2Accessory 3¤• Depending on the type of car, reception of the GPS satellitesignals might not be possible with an inside installation.• The GPS antenna should be installed at a position that isspaced at least 12 inch (30 cm) from cellular phone or othertransmitting antennas. Signals from the GPS satellite may beinterfered with by these types of communication.• Painting the GPS antenna with (metallic) paint may cause adrop in performance.

/ 11

Related manuals for Kenwood DDX5036