4 | EnglishBCPRK SWā + +BCAAREMO.CONTTV ANTENNA INPUTTO MONITOR UNITConnectionConnection cable (Included in the disc changer)Antenna Cord FM/AM antenna inputConnect to the vehicle's parking brakedetection switch harnessusing the supplied relay connector.To vehicle's reverse lamp harnessTo car light control switchReveres sensor wire (Purple/White)For the sake of safety, be sure to connect the parking sensor.Dimmer control wire (Orange/White)When using the optional power amplifier,connect to its power control terminal.To "EXT.AMP.CONT." terminal of the amplifierhaving the external amp control function.TV tuner (Optional)Parking sensor wire (Light Green)Battery wire (Yellow)Ground wire (Black) - (To car chassis)FUSE ( 15A )Ignition wire (Red)If no connections are made, do not letthe cable come out from the tab.Steering remote control input(Light Blue/Yellow)To steering remoteConnect to the terminal that is grounded when eitherthe telephone rings or during conversation.Depending on what antenna you are using,connect either to the control terminal of themotor antenna, or to the power terminal for thebooster amplifier of the film-type antenna.If no connections are made, do not let the cable come out from the tab.Mute wire (Brown)Motor antenna control wire(Blue)Power control wire(Blue/White)External amplifier control wire(Pink/Black)To connect the Kenwood navigation system,consult your navigation manual.Ignition keyswitchACCCar fusebox(Main fuse)BatteryCar fuse boxDisc Changer etc.(Optional)