Kenwood DDX6034M Instruction Manual

Also see for DDX6034: Installation manual Service manual

Contents

Kenwood DDX6034M Instruction Manual Manual pdf 72 page image

72 DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034MSetup MenuSpeaker SetupYou can select a speaker type and its size to getthe best sound effects.Display the Speaker Select screen1Touch [ ] > [ ] > [Audio SETUP] >[Speaker Select]. (page 58)Select a speaker you wish to adjust2When the speaker type and size are set, thespeaker crossover network and equalizer curveare set automatically.DNX/ DDX7 models222111333DDX6 models2221113331 Front speaker2 Rear speaker3 Subwoofer[Subwoofer] Sets the availability ofsubwoofers. (DDX6 models only)[Tweeter] You can set the tweeter when youare selecting front speakers. (DNX/DDX7models only)If you are using a tweeter together with thefront speakers, set the tweeter to "ON". In the"ON" position, the Equalizer is adjusted to itsbest position.[X'over] Displays the Speaker Crossover Setupscreen.You can adjust the crossover setup that wasset automatically when you selected thespeaker type.Select a speaker type3You can select any of the following speakertypes.DNX/ DDX7 models"Front" OEM, 10 cm, 13 cm, 16 cm, 17 cm, 18cm, 4x6, 5x7, 6x8, 6x9, 7x10"Rear" NONE, OEM, 10 cm, 13 cm, 16 cm, 17cm, 18 cm, 4x6, 5x7, 6x8, 6x9, 7x10"Subwoofer" NONE, 16 cm, 20 cm, 25 cm, 30cm, 38 cm overDDX6 modelsStandard, Narrow, Middle, Wide⁄Select "NONE" if you have no speakers.•Crossover Network SetupYou can set a crossover frequency of speakers.Select the speaker to set the crossover12221113331 Sets the High Pass Filter of the front speaker.2 Sets the High Pass Filter of the rear speaker.3 Sets the Low Pass Filter of the sub woofer.Display the Crossover setup screen2Set the crossover3