Kenwood DDX630WBT Instruction Manual

Contents

54 DDX630WBT/DDX630WBTM/DDX630W/DDX630WMMenu items Selectable setting/item Initial: UnderlinedConnection ♦ Connect♦ Disconnect: ☞ page 47: ☞ page 47PIN Code Changes the PIN code of the unit.• Enter a new PIN code, then press [Enter].Device Name Shows the device name to be shown on the Bluetooth device — “KENWOODBT MM-6U2.”DeviceAddressShows the device address of the unit.PhoneDevice*1Shows the connected phone device name.AudioDevice*2Shows the connected audio device name.AutoConnect♦ OFF♦ ON: Cancels.: The connection is automatically established with the lastconnected Bluetooth device when the unit is turned on.BluetoothHF/AudioSelect the speakers used for Bluetooth (both phone use and audio player).♦ Front Only♦ All: From front speakers only.: From all speakers.Initialize Hold [Enter] to initialize all settings you have made for using Bluetoothmobile phone and Bluetooth audio player.AutoResponse*1♦ OFF♦ ON: The unit does not answer the calls automatically. Answerthe calls manually.: The unit answers the incoming calls automatically within5 seconds.SMS Notify*1 ♦ OFF♦ ON: The unit does not inform you of the arrival of a message.: The unit informs you of the arrival of a message by ringingand displaying “Receiving Message.”Ring Mode*1 ♦ System♦ Phone: Selects the ring tone set on the unit.: Selects the ring tone set on the mobile phone. (Thisfunction may not work depending on the mobile phone.)Ring ToneChange*1When <Ring Mode> is set to <System>, press [Enter], then select the ringtone for received calls and SMS from <Tone1>, <Tone2>, <Tone3>.♦ Call Tone♦ MessageTone: Selects the ring tone for phone calls.: Selects the ring tone for SMS.*1 Appears only for <Handsfree Mode>.*2 Appears only for <Bluetooth Mode>.