Kenwood DDX7015 Instruction Manual

Also see for DDX7015 - Excelon - DVD Player: Installation manual Installation manual Installation manual Instruction manual Service manual

Kenwood DDX7015 Instruction Manual Manual pdf 46 page image

1 Returns to the Control screen of the previoussource.2 Calls the Setup Menu. (see page 57)3 Calls the Sound Effects Menu.4 PCM CenterIf you set to "On", a sound is output from the centerspeaker.5 Turns the Dolby Pro Logic function on or off.6 Turns the Bi Phantom function on or off.If you set to on, the signal of the center channel iscontrolled so that it can be exactly positioned.7 Sets up the dynamic range when the Dolby Digitalsound is used.If you set to "On", it compresses the dynamic rangeto control loud sounds.8 The DSP unit settings return to default.• The Dolby Pro Logic and PCM Center functionsare effective when the 2ch PCM signal is used.• You can set up the Bi Phantom function when theDolby Pro Logic function is on.Displaying the Digital EffectscreenDigital Effect screenDigital E f f e c tDigital Effect (with the optional accessory DSP unit connected only)You can set up the Digital Effect.English 91Sound Effects MenuEnglish90 EnglishZone ControlYou can set the front and rear audio source.Displaying the Zone ControlscreenZone Control screen (when the Zone function is On)Zone C on t r o l1 Returns to the Control screen of the previoussource.2 Calls the Setup Menu. (see page 57)3 Calls the Sound Effects Menu.4 Turns the Zone Function (that sets different sourcesounds for front and rear speakers) On or Off.When turned On, and are shown.5 Sets the front and rear audio source separately.(This button appears when the Zone function is On.)When the rear speaker sound is switched, theaudio source that is output at the AV OUTPUTterminal is also switched to the same source.However, if you have set the "Area" to "Reverse",the audio source that is output at the AV OUTPUTterminal is switched depending on the front soundsource.6 Switches the front and rear audio sources.(This button appears when the Zone function is On.)Use "Reverse" to change over the front and rearaudio sources.• If the zone function is turned on, the [F] / [R]button appears on each source control screen,with which you can adjust the volume balancebetween the front and rear sources.• If you select DVD as the main source when theoptional accessory DSP unit is connected, noDVD sound is output from the sub-source.RFMenu Dua l Z o n eRearF r o n tDVDZoneAreaZone Con t r o lTUNERR e v e r s eF RSet UpSRCAudioATTNEWSINTIAF1 3 : 5 0DVD V I DEOREPPBC SCRL TIMESet UpAudioDirectSRCT i t l e 1 C h a p 3 T 0 : 0 5 : 2 0K E N W O O DT- R E PF R1 445 5632MenuD i g i t a l E f f e c tDe f e a tOn O f fPCM C e n t e rOn O f fOnOnO f fD o l b y P r o L o g i cB i P h a n t omO f fDynam i c R a n g eSet UpSRCAudio14 485 567 7632