|
4INITIAL SETTINGSINITIAL SETTINGSInitial setupWhen you power on the unit for the first time orreset the unit, the initial setting screen appears.• You can also change the settings on the screen. (Page 60)1*(Page 61)Activate or deactivate thedisplay demonstration.(Page 62)Select the text languageused for on-screeninformation.• Set to display the operationbuttons and menu itemsin the selected language([Local]) or English([English]).*(Page 8)Adjust the panel angle.Interrupt>(Page 61)Select [ON] whenconnecting the rear viewcamera.(Page 57)Select the color of thebuttons on the monitorpanel.2 Finish the procedure.The screen is displayed.* Only for DDX7015BT/DDX715WBT.Setting the security functionR Registering the security code (only forDDX7015BT/DDX715WBT)You can set a security code to protect your receiversystem against theft.1 Display the screen.On the source control screen:2 Display the setting screen.3 Display the screen.• Press [K] repeatedly to change the page onthe menu screen.• To clear the registered security code, performsteps 1 and 2, then press [CLR] in Code>.4 Enter a four-digit number (1), thenconfirm the entry (2).• Press [Clear] to delete the last entry.• Press [Cancel] to cancel the setting.5 Repeat step 4 to confirm your securitycode.Now, your security code is registered.• When the unit is being reset or disconnected fromthe battery, you are required to enter the securitycode. Enter the correct security code, then press[Enter].
|
