70 DDX7029Setup MenuAV Interface SetupYou can set audio and visual (AV) interfaceparameters.1 Display the AV Interface screenTouch [AV Interface] in the SETUP Menu (page64).2 Setup each item14231 Sets a name to be displayed when youselect a system that is connected via the AVINPUT port. ( VIDEO)⁄• If you have set the navigation system connection to "AVIN", the display is fixed to "NAV".2 Sets an image display of the system that isconnected via the AV INPUT port. ( Off )"Off": When the image source is switched,an image entered via the AV INPUTport is displayed."On": When an image signal is enteredvia the AV INPUT port, this image isdisplayed.3 Selects a navigation system connection.( RGB)"RGB": Allows the Kenwood’s NavigationSystem to connect via its interfacecable."AV-IN": Allows a third-party navigationsystem to connect via the AV INPUTport."Off": Must be used if no navigation systemis connected. (The navigation displayis cancelled when the AV source isswitched.)4 Return to the original screen.5675 Selects an AV source to be output at the AVOUTPUT port. ( AV-IN)6 Sets a method to switch to the rear viewcamera video display. ( Off )"On": Switches to the rear view cameravideo display when engaging theshift knob of car to "Reverse"."Off": Switches to the the rear view cameravideo display when engaging theshift knob of car to "Reverse" andthen pressing the [V.SEL] switchseveral times.7 You can flip the left and right of the rearview camera video display. Set to "Reverse"and the the rear view will be displayed leftand right in mirror image on the screen.( Off )8910118 Selects speakers used for voice guidance ofthe navigation system. ( F-Left)"F-Left": Uses the front left side speakerfor voice guidance."F-Right": Uses the front right side speakerfor voice guidance."Front All": Uses both front speakers forvoice guidance.9 Adjusts the volume for voice guidance ofthe navigation system. ( 21)