Kenwood DDX7039M Instruction Manual

Also see for DDX7039: Instruction manual Installation manual Service manual Service manual

Contents

Kenwood DDX7039M Instruction Manual Manual pdf 7 page image

English 7• If you experience problems during installation,consult your Kenwood dealer.• When you purchase optional accessories, checkwith your Kenwood dealer to make sure that theywork with your model and in your area.• The characters conforming to ISO 8859-1 characterset can be displayed.• The RDS or RBDS feature won’t work where theservice is not supported by any broadcastingstation.• The illustrations of the display and the panelappearing in this manual are examples used toexplain more clearly how the controls are used.Therefore, what appears on the display in theillustrations may differ from what appears on thedisplay on the actual equipment, and some of theillustrations on the display may be inapplicable.How to reset your unit• If the unit fails to operate properly, press the Resetbutton. The unit returns to factory settings whenthe Reset button is pressed.• Remove the USB device before pressing the Resetbutton. Pressing the Reset button with the USBdevice installed can damage the data contained inthe USB device. For how to remove the USB device,refer to (page 13).• Press the reset button if the disc auto changer failsto operate correctly. Normal operation should berestored.Reset buttonSRCCleaning the UnitIf the faceplate of this unit is stained, wipe it with adry soft cloth such as a silicon cloth.If the faceplate is stained badly, wipe the stain offwith a cloth moistened with neutral cleaner, thenwipe it again with a clean soft dry cloth.¤• Applying spray cleaner directly to the unit may affect itsmechanical parts. Wiping the faceplate with a hard clothor using a volatile liquid such as thinner or alcohol mayscratch the surface or erases characters.TV tuner that can be connected to this unit• KTC-V300PAbout Navigation units that can beconnected to this unit• KNA-DV2600About iPod that can be connected to thisunitYou can control an iPod from this unit by connectingan iPod (commercial product) with Dock connectorusing an optional accessory iPod connection cable(KCA-iP300V).The following iPods can be controlled from this unit.Controllable iPod Software versioniPod nano iPod nano software 1.2iPod nano second generation iPod nano software 1.1.1iPod with video iPod software 1.2You must update your iPod software if its version isless than the above.The iPod software version is displayed in the "Version"field by pressing the iPod MENU button and thenselecting "Set", "Information". The latest iPod softwareupdater can be downloaded from the AppleComputer web site.The character set supported by this unit is ISO08859-1.Characters that cannot be displayed correctly appearas "*".By connecting your iPod to this unit with an optionalaccessory iPod connection cable (KCA-iP300V), youcan supply power to your iPod as well as charge itwhile playing music. However, the power of this unitmust be on.Notes