Kenwood DDX749WBT Instruction Manual

Contents

English 67Connecting Wires to TerminalsC onnect to vehicle's reverse lampharness when using the optional rearview camera.(Parking sensor wire)C onnect to the vehicle's parkingbrake detection switch harness.F or best safety, be sure to connectthe parking sensor.⁄L ight GreenExtension cable (Accessory 2)Antenna CordFM/AM antenna inputAccessory 1FUSE ( 10A )If no connections are made, do not let the cable come out from the tab.(Mute control wire)Brown To the terminal that is grounded when either the telephonerings or during conversation. (To connect the Kenwoodnavigation system, consult your navigation manual.)W hen using the optional power amplifier, connect to itspower control terminal.(Power control wire)Blue/White(Reverse sensor wire)Purple/WhiteBluetooth Microphone(Accessory 4)S ubwoofer Preout (monaural)(Steering remote control wire)C onnect tovehicle's steeringwheel remotecontrol harness.Connect to vehicle's harness.Connect to vehicle's harness.Pin Colour and functionsA1 Orange/White DimmerA2 Yellow BatteryA4 Red Ignition (ACC)A5 Blue Antenna ControlA6 Black Earth (Ground) ConnectionA8/A7 White+ / White/Black- Front Speaker (Left)Pin Colour and functionsA10/A9 Gray+ / Gray/Black- Front Speaker (Right)B2/B1 Green+ / Green/Black- Rear Speaker (Left)B6/B5 Purple+ / Purple/Black- Rear Speaker (Right)C6 Gray/Red GroundC7 Light Green/Red Input 1C8 Purple/Red Input 2