40SETTINGSSetting menu items❏Displaying the menu screen•You can change the page to display more items bypressing [J]/[K].•You cannot change the screen when [STANDBY] is selected on the.(page 7)❏Fader: Adjust the front and rear speaker outputbalance.•F6toR6(Initial:0)– When using a two-speaker system, set the faderto the center (0).Balance: Adjust the left and right speaker outputbalance.•L6toR6(Initial:0)Press [J]/[K]/[H]/[I] or drag [] to adjust.– To clear the adjustment, press[Center].Change the sound mode or adjust and store theequalization for each source. (Page 33)•Natural(Initial)/Rock/Pops/Easy/Top40/Jazz/iPod*1/Powerful/UserYou can activate/deactivate loudness.•ON(Initial): Boost low and high frequencies toproduce a well-balanced sound at a low volumelevel.•OFF: Cancels.Adjust and store the auto-adjustment volume levelfor each source. (For discs, the adjustment is storedfor each of the following categories: DVD/DVD-VR/VCD, CD, and DivX/MPEG1/MPEG2/H.264/WMV/MP3/WMA/WAV/AAC/FLAC.) The volume levelwill automatically increase or decrease when youchange the source.•–15to+6(Initial:0)Adjust the subwoofer level.•–50to+10(Initial:0)Select a car type and speaker location. (Page 33)•Car type:Off(initial)/Compact/Full Size Car/Wagon/Minivan/SUV/ Minivan (L ong)•Speaker Location:Select the location of thespeaker on your car.–Front Speaker:Door(initial)/On Dash/UnderDash–Rear Speaker*2:Door/ Rear Deck/2ndRow/3rd RowSelect the speaker size and adjust the crossoverfrequency. (Page 34)Adjust the sound effects according to your listeningposition. (Page 34)Select whether to use the Digital Signal Processor(DSP) system.•Bypass: Invalidates all the settings for the DSP.•Through(Initial): Uses the DSP.You can reduce the driving noise by raising thebandwidth.•ON: Activates the Drive EQ.•OFF(Initial): Cancels.*1Appears only when iPod is selected as the source.*2The initial setting varies depending on the car type setting.
