84 EnglishInstalling the UnitBend the tabs of the mounting sleevewith a screwdriver or similar utensil andattach it in place.For more stable attachment the unit (DDX790/DDX770/DDX7070BT only)BracketAccessory 8ڥ Make sure that the unit is installed securely inplace. If the unit is unstable, it may malfunction(eg, the sound may skip).Installation on Toyota,Nissan or Mitsubishi Carusing BracketsCar BracketAccessory 3 (M5x6mm)or accessory 4 (M5x7mm)Accessory 3 (M5x6mm)or accessory 4 (M5x7mm)Installing the Trim Plate1 Attach accessory 5 to the unit.Accessory 5Removing the Trim Plate(DDX470/DDX4070BT/DDX370/DDX3070 only)1 Engage the catch pins on the extractionkey 6 and remove the two locks on thelower part. Lower the frame and pull itforward as shown in the figure.Accessory 6LockCatchڥ The frame can be removed from the top side inthe same manner.2 When the lower part is removed, removethe upper two locations.Installing/Removing the Unit
