Kenwood DDX795 Instruction Manual

Kenwood DDX795 Instruction Manual Manual pdf 58 page image

56 ENGLISHRemote ControllerRemote Controller• For DDX6018BT/DMX6018BT/DDX5018BT/DDX718WBTL/DMX718WBTL: This unit can beoperated using the remote controller (RC-DV340)supplied with this unit.• For DDX795/DDX775BH/DDX595/DDX575BT:Optional remote controller KNA-RCDV331 isdesigned for controlling this unit. Refer to theinstruction manual that comes with the remotecontroller.CAUTION• Put the remote controller in a place where it willnot move during braking or other operations. Adangerous situation could result if the remotecontroller falls down and gets wedged under thepedals while driving.• Do not leave the battery near fire or under directsunlight. A fire, explosion or excessive heatgeneration may result.• Do not recharge, short, break up or heat the battery,or place it in an open fire. Such actions may causethe battery to leak fluid. If spilled fluid comes incontact with your eyes or clothing, immediately rinsewith water and consult a physician.• Place the battery out of reach of children. In theunlikely event that a child swallows the battery,immediately consult a physician.PreparationBattery installationUse two “AAA”/“R03”-size batteries.Insert the batteries with the + and – poles alignedproperly, following the illustration inside the case.• Always insert batteries from – poles to avoid bendingthe springs.• If the remote controller operates only over shorterdistances or does not operate at all, it is possible thatthe batteries are depleted. In such instances, replaceboth batteries with new ones.Remote controller mode switchThe functions operated from the remote controllerdiffer depending on the position of the mode switch.DVDtT VtAUDt DVDT VNAVAUDtttt• AUD mode: Switch to this mode when controlling aselected source or tuner source, etc.– When controlling a player that is not integrated inthe unit, select “AUD” mode.• DVD mode: Switch to this mode when playing DVDsor CDs etc. with the player integrated in this unit.• TV mode: Not used.• NAV mode: Not used.• The position of the remote control mode switch isindicated in the title of each mode, e.g., “AUD mode”.Basic operations for RC-DV340 (supplied)