English 69Crossover Network SetupYou can set a crossover frequency of speakers.1 Select the speaker to set the crossover41312 251 Sets the High Pass Filter of the front speaker.2 Sets the High Pass Filter of the rear speaker.3 Sets the Low Pass Filter of the sub woofer.4 Switches to the crossover setup screen.5 Returns to the original screen.2 Display the Crossover setup screen3 Set the crossover6786 Sets the cross over frequency.7 Sets the sub woofer phase. (Only when"Subwoofer" is set to "On" in Audio Setupand "LPF SUB FREQ" is set to other than"Through")8 Returns to the original screen.DVD SetupYou can set up the DVD play.1 Display the DVD SETUP screenTouch [DVD SETUP] in the SETUP Menu(page 68).2 Setup each item123451 Selects a disc menu language. *1(See , page 70)2 Selects a subtitle language. *1(See , page 70)3 Selects an audio language. *1(See , page 70)4 Sets the dynamic range. ( Wide)*1The dynamic range is reduced by changingfrom "Wide" to "Normal" and from "Normal"to "Dialog". "Dialog" makes the total soundvolume becomes larger as compared with"Wide" and "Normal", allowing you to listento the movie's dialog more clearly.This is effective only when you are using aDolby Digital software.5 Returns to the original screen.ڥ *1 Disabled when a DVD is being played.Next page 3