Kenwood DMX125DAB Quick Start Manual

Also see for DMX125DAB: Quick start guide

Contents

3English |Continued on the next page...Getting Started1 Turn the ignition key of your car to ACC.The unit is turned on.2 Press the <8MENU> button.3 Touch [ ].4 Touch the corresponding key and set the value.[System][Beep Tone]Activates or deactivates the key-touch tone.“ON” (Default), “OFF”[Language]Select the language used for the control screenand setting items. Default is “English”.[Time/Date]Adjust the clock time. (P.3).[Clock Mode]Select the time display format.[12hr] (Default) / [24hr][Steering Remote]Sets the desired function in the steering remotecontroller.[Parking Guidelines]You can display parking guidelines to enableeasier parking when you shift the gear to thereverse (R) position. Default is “ON”.[Guidelines SETUP]If you select [ON] for [Parking Guidelines], you canadjust the parking guidelines.[System Reset]Touch [System Reset] and then touch [YES] to setall the settings to the initial default settings.[Bluetooth]Displays the Bluetooth Settings screen.[Screen][Dimmer]Select the dimmer mode.“High” (Default) / “Mid” / “Low”[Demo]Select the demonstration mode. Default is “ON”.5 Touch [6].Clock settingsÑ Synchronizing the clock time with FMRDSActivate [RDS Clock Sync].See Radio Setup (P.5).Ñ Adjusting the clock manually✎ NOTE• Deactivate [RDS Clock Sync] before adjusting theclock.1 Press the <8MENU> button.2 Touch [ ].3 Touch [System].4 Touch [Time/Date].Clock screen appears.5 Touch [R] or [S] to set the clock time.6 Touch [6].!B5K-0673-01_K_EnFrEs.indb 3 2019/04/11 14:59DAB