Kenwood DMX8020DABS Quick Start Manual

Also see for DMX7520DABS: Instruction manual

Connection/Installation17EnglishÑ 3-way speaker system setup++++When connecting to an external amplifier,connect its ground wire to the car’s chassis toavoid damaging the unit.White/BlackGray/BlackGreen/BlackPurple/BlackSpeaker impedance: 4-8 ΩPurpleGreenGrayWhite To mid range leftspeakerSubwoofer PreoutTo mid range rightspeakerMid Range PreoutTo tweeter left speakerTweeter PreoutTo tweeter rightspeakerPower amplifier(optionalaccessory)RCA Cable(Sold separately)InputSpeakerPreoutNOTE• For speaker system setup, see 3-way speakersystem setup (P.65) in the Instruction Manual.• For speaker setup and crossover setup, seeSpeaker / X’over setup (P.66) in the InstructionManual.• For how to connect speaker wires to terminalsother than speaker terminals and Preoutterminals, see Connecting the system andexternal components (P.17) and Connectingwires to terminals (P.16).Ñ Connecting the system andexternal components43215 67891013141511121 HDMI inputUse HDMI cable KCA-HD100 (optionalaccessory).When you connect the cable to HDMI terminal,remove the fixture. After connecting the cable,put the fixture again.HDMI connectorFixture2 Digital Radio antenna CX-DAB1 (Optionalaccessory)!Use of a CX-DAB1(optional accessory) as aDigital Radio antenna is recommended.When using a commercially available DigitalRadio antenna, the diameter of the SMBconnector must be Φ6.5 mm or less.Φ 6.5 mm (maximum)3 AV Audio output (ø3.5 mini jack)4 FM/AM antenna input