Kenwood DNN9230DAB Quick Start Manual

Also see for DNN9230DAB: Manual Instruction manual Quick use guide Easy setup guide

EN 27DNN9230DABAttaching the front panelHold the front panel securely so asnot to drop it accidentally. Fit thepanel onto the attaching plate until itis firmly locked.1123Accessory 4Trim plateAttach accessory 5 to the unit.5GPS antennaGPS antenna is installed inside ofthe car. It should be installed ashorizontally as possible to allow easyreception of the GPS satellite signals.To mount the GPS antenna insideyour vehicle:1) Clean your dashboard or othersurface.2) Remove the separator of themetal plate (accessory 7).3) Press the metal plate (accessory7) down firmly on yourdashboard or other mountingsurface. You can bend the metalplate (accessory 7) to conform toa curved surface, if necessary.4) Remove the separator of the GPSantenna (accessory 6), and stickthe antenna to the metal plate(accessory 7).76• Depending on the type of car, receptionof the GPS satellite signals might not bepossible with an inside installation.• The GPS antenna should be installed ata position that is spaced at least 12 inch(30 cm) from cellular phone or othertransmitting antennas. Signals from theGPS satellite may be interfered with bythese types of communication.• Painting the GPS antenna with (metallic)paint may cause a drop in performance.