Kenwood DNN9350BT Quick Start Manual

24 ñ EnglishÑ Connecting wires to terminalsAV-IN/OUTMICGPSAV-OUTAUDIOSW FRONT REARR LPOWERFUSE 10AREMOTEM4 x 8mmMAXiPod/AV-IN2HDMI/MHL++++AAREMOTECONTILLUMIMUTEANT CONTP. CONTSTEERINGWHEELREMOTEINPUTRed (Ignition wire)Black (Ground wire) ¤(To car chassis)Yellow (Battery wire)To use the steering wheel remote controlfeature, you need an exclusive remote adapter(not supplied) matched to your car.Light Blue/Yellow(Steering remote control wire)Orange/White (Dimmercontrol wire)Brown (Mute control wire)Blue(Antenna control wire)Blue/White(Power control wire)Connect to the terminal that is groundedwhen either the telephone rings or duringconversation.To use the Mute feature, you need to hookup this wire to your telephone by using acommercial telephone accessory.Depending on what antenna you are using,connect either to the control terminal of themotor antenna, or to the power terminal for thebooster amplifierof the film-type antenna. (Max. 300mA, 12V)When using the optional power amplifier,connect to its power control terminal.If no connections are made,do not let the cable come out from the tab.To steering remoteTo car light control switchIgnition keyswitchCar fuse box(Main fuse) Car fuse boxACCBatteryAccessory 1White/BlackGray/BlackGreen/BlackPurple/BlackSpeaker impedance: 4-8 ΩPurpleGreenGrayWhiteTo front leftspeakerTo front rightspeakerTo rear leftspeakerTo rear rightspeaker