Kenwood DNR935WBT Instruction Manual

Also see for DNR935WBT: Quick start guide

Contents

100Return to the Top pageCamera ControlWhen a CMOS-3xx (optional accessory) isconnected, the camera can be controlledfrom this unit.Preparation• [EJECT Key Longer than 1 Second] must be set to“CAM”. See User interface (P.103).Camera ControlYou can adjust the camera angle of thecamera system and display of the guideline.1 Press the <G> button for 1 second.Camera view screen appears.2 Adjust each item as follows.1 231 GuidelinePressing each time turns on or off theguideline display alternately.2 AnglePressing each time changes camera angles inthe following order:Super wide view/ Wide view/ Overhead view/Wide view + Top view/ Corner view3Clearing the Camera View display.Switching the View CameraSwitching between the front view cameraand the rear view camera.1 Press the <G> button for 1 second.Camera view screen appears.2 Touch illustrated area during Cameraview screen.Switches between the front view cameraand rear view camera each time you touchthe illustrated area.ñ Camera Control