Kenwood DNX450TR Quick Start Manual

Contents

English ñ 19Ñ Removing the trim plate1) Engage the catch pins on the extraction key(accessory 3) and remove the two locks on thelower level.Lower the trim plate (accessory 5) and pull itforward as shown in the figure.LockCatch35✎ NOTE• The trim plate can be removed from the top sidein the same manner.2) When the lower level is removed, remove theupper two locations.Ñ Removing the unit1) Remove the trim plate by referring to step 1 in“Removing the trim plate”.2) Insert the two extraction key (accessory 3)deeply into the slots on each side, as shown.33) Lower the extraction key toward the bottom,and pull out the unit halfway while pressingtowards the inside.✎ NOTE• Be careful to avoid injury from the catch pins onthe extraction key.4) Pull the unit all the way out with your hands,being careful not to drop it.