English 71Speaker SetupYou can select a speaker type and its size to getthe best sound effects.Display the Speaker Select screen1Touch [ ] > [ ] > [Audio SETUP] >[Speaker Select]. (page 57)Select a speaker you wish to adjust2When the speaker type and size are set, thespeaker crossover network and equalizer curveare set automatically.1231 Front speaker2 Rear speaker3 Subwoofer[Subwoofer] Sets the availability ofsubwoofers.[X'over] Displays the Speaker Crossover Setupscreen.You can adjust the crossover setup that wasset automatically when you selected thespeaker type.Select a speaker type3You can select front speaker type."Standard"/ "Wide"/ "Middle"/ "Narrow"⁄Speaker cannot be setup when in STANDBY source•mode.Crossover Network SetupYou can set a crossover frequency of speakers.Select the speaker to set the crossover12221113331 Sets the High Pass Filter of the front speaker.2 Sets the High Pass Filter of the rear speaker.3 Sets the Low Pass Filter of the subwoofer.Display the Crossover setup screen2Set the crossover3[Phase] Sets the phase of subwoofer output.The phase is reversed 180 degrees when setto "Reverse".Sets the subwoofer phase. (Only when"Subwoofer" is set to "ON" in Speaker Setup,and [LPF FREQ] is set to other than "Through")[HPF FREQ] High Pass Filter adjustment.(When front or rear speaker is selected onSpeaker Select screen)[LPF FREQ] Low Pass Filter adjustment. (Onlywhen "Subwoofer" is set to "ON" in SpeakerSetup)
