62 DNX5240BT/DNX5240/DDX5024/DDX5054/DDX54R2 Adjusts the Red value.3 Adjusts the Green value.4 Adjusts the Blue value.5 Returns to the "Panel Color Coordinate"screen.3 Select a Preset number to registerAdjusted color is registered to the selectedPreset button.4 Complete the color coordinationSetup MenuAV Interface SetupYou can set audio and visual (AV) interfaceparameters.1 Display the AV Interface screenTouch in the "SetupMenu" screen (page 56).2 Setup each item12341 Moves to the "AV Interface 2" screen.2 Sets a name to be displayed when youselect a system that is connected via the AVINPUT port. ( "VIDEO")3 Sets an image display of the system that isconnected via the AV INPUT port. ( "OFF")"OFF": When the image source is switched,an image entered via the AV INPUTport is displayed."ON": When an image signal is enteredvia the AV INPUT port, this image isdisplayed.4 Selects a navigation system connection.( "RGB") (DDX5024/DDX5054/DDX54Ronly)"RGB": Allows the Kenwood's NavigationSystem to connect via the AV INPUTport."AV-IN": Allows a third-party navigationsystem to connect via the AV INPUTport."Off": Must be used if no navigationsystem is connected. (Thenavigation display is cancelledwhen the AV source is switched.)