Kenwood DNX570TR Quick Start Manual

Also see for DNX570TR: Instruction manual Quick start guide

Contents

106106Return to the Top pageSetting UpAV Input SetupYou can set AV input parameters.1 Touch [Menu] on any screen.2 Touch [SETUP].SETUP Menu screen appears.3 Touch [Source].4 Touch [AV-IN SETUP] in the list.AV-IN SETUP screen appears.5 Set each item as follows.AV-IN Interface (DNX570TR)Select the source connected to AV-IN.Rear Camera: Select when the rear viewcamera is connected.AV-IN (Default): Select when AV device isconnected.iPod AV Interface Use/ AV-IN2 Interface* 1Sets the terminal which iPod is connected.Setting values are iPod and AV-IN2.iPod (Default): Set this when an iPod isconnected using KCA-iP202connector. You can listen toaudio or watch video in youriPod as iPod source.AV-IN2: Set this when an iPod is connectedusing KCA-iP102 connector.You canlisten to audio in your iPod as iPodsource. You can also listen to audio orwatch video output from a AV deviceas AV-IN2 source.AV-IN Name/AV-IN2 Name*2Sets a name to be displayed when you selecta system that is connected via the AV INPUTport. Default is “VIDEO”.*3*1 This item can be set when in STANDBYsource and also the iPod is disconnected.*2 [AV-IN2 Name] becomes settable when“AV-IN2” is selected in [iPod AV InterfaceUse].*3 When ”Rear Camera” is selected for [AV-INInterface], ”Rear Camera” is selected as thedefault of [AV-IN Name].