Kenwood DNX6140 Instruction Manual

Also see for DDX5034: Service manual Instruction manual Installation manual

Contents

Help? ErrorWhen the unit fails to operate correctly, thecause of the failure appears on the display.Protect :Protective circuit has been activated because a speakercord has shorted or it has come in contact with the carchassis.• Wire or insulate the speaker cord as appropriateand then push the Reset button (page 6).Hot Error:When the internal temperature of this unit rises to 60°Cor more, the protection circuit is activated and youmay not be able to operate the unit. At such times thismessage will appear.• Use the unit again after reducing thetemperature inside the vehicle.Hold Error:Activation of the protective circuit when thetemperature inside the disc changer is higher than 60degrees Celsius stops the disc changer from operating.At such times this message will appear.• Use when the temperature at the site where thedisc changer has been fitted has dropped.Mecha Error:The disc player is malfunctioning.• Eject the disc and try inserting it again. Contactthe Kenwood dealer if this indicator continuesblinking or the disc cannot be ejected.Disc Error:An unplayable disc is inserted.Read Error:Disc is quite dirty.• Clean the disc, referring tot he section on (page 6).Disc is upside down.• Load the disc with the labeled side up.Region code Error:The disc you wanted to play has a region code thatcannot be played with this unit.Parental level Error:The disc you wanted to play has a higher level than theparental level you set.Error 07-67:The unit is not operating correctly due to some reasonor other.• Push the unit's Reset button. If the "Error 07-67"message does not disappear, see your nearestKenwood dealer.No Device (USB device)/Disconnected (iPod):The USB device/iPod is selected as a source althoughno USB device/iPod is connected.• Change the source to any source other thanUSB/iPod. Connect an USB device/iPod, andchange the source to USB/iPod again.No Music:The connected USB device contains no playable audiofile.Media was played that doesn't have data recorded thatthe unit can play.USB Device Error!!:The connected USB device is rated a current capacityhigher than the allowable limit.• Check the USB device.Some trouble may have occurred to the connectedUSB device.• Change the source to any source other than USB.Remove the USB device.Authorization Error:Connection to the iPod has failed.• Remove the iPod and then reconnect it.The unit does not support the iPod.• See that can be connected to this unit>(page 7).Update your iPod:The iPod's software is an older version which the unitcan not support.• Confirm that the software for the iPod is thelatest version. See that can be connectedto this unit> (page 7).98 DNX6140/DNX6000EX/DNXS140/DDXS14/DDXS034/DDXS034BT