Kenwood DNX697S Quick Start Manual

Also see for DNX577S: Instruction manual

Basic Operations9EnglishInitial SettingsInitial SETUPPerform this setup when you use this unit firsttime.1 Set each item as follows.■ [Locale]Select the country for the navigation system.The language, the distance unit, and thegasoline unit are set.1 Touch [Locale].2 Select the desired country.■ [Language]Select the language used for the controlscreen and setting items. Default is “AmericanEnglish(en)”.1 Touch [Language].2 Touch [Language Select].3 Select the desired language.4 Touch [ ].For details, see User Interface Setup (P.88)in the Instruction Manual.■ [Display]Set the key illumination color.If it is hard to see the image on the screeneven, adjust the viewing angle.1 Touch [Display].2 Touch [Key Color].3 Select the desired color.4 Touch [ ].(DNX997XR only)5 Touch [Display Adjustment].6 Adjust a viewing angle and a tilt position.7 Touch [ ].(DNX697S / DNX577S only)5 Touch [Viewing Angle].6 Select a viewing angle.7 Touch [ ].Viewing AngleYou can adjust the viewing angle when theimage on the screen is difficult to see evenly.The smaller the (negative) value, the morewhitish the image on the screen looks. "0"(Default)/"-1"/"-2"/"-3"For details, see Display Setup (P.90) in theInstruction Manual.■ [Camera]Set the parameters for the camera.1 Touch [Camera].2 Set each item and touch [ ].For details, see Camera Setup (P.82) in theInstruction Manual.■ [OEM SETUP]This function requires a commercial adaptor.Consult your KENWOOD dealer for details.■ [DEMO]Set the demonstration mode. Default is “ON”.2 Touch [Finish].NOTE• These settings can be made from the SETUPmenu. See Setup (P.87) in the Instruction Manual.