72 DNX7100AV Interface SetupYou can set audio and visual (AV) interfaceparameters.1 Display the AV Interface screenTouch [AV Interface] in the SETUP Menu (page66).2 Setup each item1321 Sets a name to be displayed when youselect a system that is connected via the AVINPUT port. ( VIDEO)2 Sets an image display of the system that isconnected via the AV INPUT port. ( Off )"Off": When the image source is switched,an image entered via the AV INPUTport is displayed."On": When an image signal is enteredvia the AV INPUT port, this image isdisplayed.3 Returns to the original screen.Setup menu4564 Selects an AV source to be output at the AVOUTPUT port. ( AV-IN)5 Sets a method to switch to the rear viewcamera video display. ( Off )"On": Switches to the rear view cameravideo display when engaging theshift knob of car to "Reverse"."Off": Switches to the the rear view cameravideo display when engaging theshift knob of car to "Reverse" andthen pressing the [V.SEL] switchseveral times.6 You can flip the left and right of the rearview camera video display. Set to "Reverse"and the the rear view will be displayed leftand right in mirror image on the screen.( Off )789107 Selects speakers used for voice guidance ofthe navigation system. ( F-Left)"F-Left": Uses the front left side speakerfor voice guidance."F-Right": Uses the front right side speakerfor voice guidance."Front All": Uses both front speakers forvoice guidance.8 Adjusts the volume for voice guidance ofthe navigation system. ( 19)