Kenwood DNX7150DAB Quick Start Manual

Also see for DNX4150BT: Instruction manual Quick start guide Quick start guide Quick start guide Instruction manual

English ñ 21⿠DNX7150DAB,Bend the tabs of themounting sleeve witha screwdriver or similarutensil and attach itin place.⿠DNX715WDABScrew (M5x6mm) (Sold separately)Screw (M5x6mm) (Sold separately)Car Bracket✎ NOTE• Make sure that the unit is installed securely inplace. If the unit is unstable, it may malfunction(eg, the sound may skip).Ñ Trim plate (DNX7150DAB, )1) Attach accessory 5 to the unit.5Ñ GPS antennaGPS antenna is installed inside of the car. It shouldbe installed as horizontally as possible to allow easyreception of the GPS satellite signals.To mount the GPS antenna inside your vehicle:1) Clean your dashboard or other surface.2) Remove the separator of the metal plate(accessory 7).3) Press the metal plate (accessory 7) down firmlyon your dashboard or other mounting surface.You can bend the metal plate (accessory 7) toconform to a curved surface, if necessary.4) Remove the separator of the GPS antenna(accessory 6), and stick the antenna to themetal plate (accessory 7).76✎ NOTE• Depending on the type of car, reception of theGPS satellite signals might not be possible withan inside installation.• The GPS antenna should be installed at a positionthat is spaced at least 12 inch (30 cm) fromcellular phone or other transmitting antennas.Signals from the GPS satellite may be interferedwith by these types of communication.• Painting the GPS antenna with (metallic) paintmay cause a drop in performance.