Kenwood DNX7190HD Quick Start Manual

Also see for DNX5060EX: Instruction manual Quick start guide Instruction manual

8080 81Return to the Top pageSetting UpReturn to the Top pageSetting UpLanguage setup1 Touch [SET] of [Language] in the UserInterface screen.Language Setting screen appears.2 Set each item as follows.Select ModeSelects the mode to select a language.Easy (Default): Selects a language easily.Advanced: Allows you to select languages forrespective items.*Language SelectSelects a language.* If you select [Advanced] for Select Mode,the following screen appears.GUI Language Select:Selects the display language used for thecontrol screen and so forth.Navigation Language Select:Selects the language used for navigation.Text Language Select:Selects the language used for tag text (songinformation).3 Touch [Enter].NOTE• To cancel the language setup, touch [Cancel].Touch panel adjustment1 Touch [Touch] in the System Menuscreen.Touch Panel Adjustment screen appears.2 Follow the instruction on the screenand touch the center of each .NOTE• To cancel the touch panel adjustment, touch[Cancel].• To reset to the initial status, touch [Reset].Security setupA red indicator will blink on the unit after theACC is set to OFF, warning potential thieves.If turned to “ON” (default), the securityindicator on the front panel flashes when thevehicle ignition is off.1 Touch [Security] in the System Menuscreen.Security screen appears.2 Touch [ON] or [OFF] of [SI].EXT SW setupSet up the external switch power mode.1 Touch [EXT SW] in the System Menuscreen.EXT SW screen appears.2 Set each item as follows.SW NameSets the name of the external device.Output PatternSets the power signal output mode among“Pulse”/“Level”. Default is “Pulse”.You can set to turn output on/off each timethe button on the EXT SW screen is touched.See External Device Control (P.88).Pulse SetSets the pulse signal output time.Outputs 500ms when “1” is set.Increases by 200ms with each step. Up to 100steps can be set.NOTE• You can enter characters only after you haveapplied the parking brake.• “Pulse”: Generates a single power signal pulse.• “Level”: Continues output of high power signal.Setup memoryAudio Control, AV-IN SETUP, Camera, andAudio SETUP settings can be memorized. Thememorized settings can be recalled at anytime. For example, even when the settingsare cleared due to replacement of thebattery, the settings can be restored.1 Touch [SETUP Memory] in the SystemMenu screen.SETUP Memory screen appears.2 Follow the instruction on the screen.[Lock]/[Unlock]*Locks or unlocks the AV-IN SETUP, and AudioSETUP settings.YesMemorizes or recalls the settings.NoCancels the function or memorization.The SETUP Menu screen appears again.* When [Lock] is selected, you cannot changethe AV-IN SETUP, and Audio SETUP settings.Also, the locked key mark is displayedunder each setting icon in the setup menu.Continued